How Much Does A 5 Gallon Bucket Of Drywall Mud Cover?

How many pounds of joint compound are in a 5 gallon bucket?

CertainTeed 48-lb Premixed All-purpose Drywall Joint Compound..

How much do I charge to hang drywall?

Drywall Costs Drywall installation costs $1,842, with a typical range of $1,023 and $2,878. This translates into a price of $1 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.

How much drywall do I need for a 10×10 room?

For example: you have a 10′ x 10′ room with 8 foot high ceilings. Each wall would be 80 square feet so four walls equals 320 square feet (sf) of drywall needed. The ceiling is 10′ x 10′ or an additional 100 square feet. Sheets of drywall are either 4 x 8’s (32 sf each) or 4 x 12’s (48 sf each).

How much would it cost to drywall a 1500 sq ft house?

Average Cost to Drywall a House by House SizeCost to Drywall a 1000 sq ft HouseTotal CostCost to Drywall a 1500 sq ft HouseLow x 5500 square feet$7,975Average x 6325$12,10016 more rows

How many gallons of drywall mud do I need?

Calculate that one gallon of joint compound will be needed to mud between 100 and 200 square feet of drywall.

How much does a 5 gallon bucket of drywall mud weigh?

59.26/7.48=7.92 pounds per gallon.

How many coats of drywall mud do I need?

You need to lay one layer of mud onto the bare wall to hold the tape, and you can usually lay another immediately after you lay the tape and scrape it. After that coat dries, you topcoat with a third layer, using a wider knife than you used for taping.

How much drywall do I need for a 2000 sq ft house?

For example, a house with 2,000 square feet of floor space and eight foot high ceilings may require anywhere between 8,000 and 9,000 square feet of drywall.

How many square feet will a box of drywall mud cover?

As a general rule, estimate 0.053 pounds of mud per square foot of drywall. So, multiply the total number of square feet by 0.053 to determine how many pounds of compound you’ll need. For example, if you are putting up 1,600 square feet of drywall, you would need: 1,600 x 0.053 = 84.8 pounds of compound.